Canon Ink Absorber – How To Clean It

February 25, 2012 § Leave a comment

If you own a Canon printer and are finding at this article, chances are you just got the “Waste ink absorber is full” error, or something similar, and have no idea what it is or what the printer expects you to do. Unfortunately, or fortunately, you are not the only one with this qoute and there are ways to solve it. If you call Canon support, they will right away tell you to bring the printer for servicing, that doesn’t help, however, when you have a description or resumé to print by tomorrow.

Firstly, it might be foremost to note that the waste ink absorber is a minuscule pad that sits under the cartridge’s “home” position and collects any loose ink that may be on the cartridge. This prevents smudges, so it’s a good thing to have. Many ink jet printers have them, but as far as I know, only Canon Pixma printers display an error when a inevitable internal counter suggests that the ink absorber may be full. If you’ve done a lot of printing, the ink absorber may no ifs ands or buts be full and you might need to have it cleaned or supplanted to ensure the best printing quality. However, if you haven’t printed that much or you have and you just need to print something right this minute, there is a way to reset the counter and stop the error from showing up again. Until the counter reaches a inevitable unknown point, that is, in which case you’ll have to repeat the procedure.

Android Tablet

Unfortunately, the instructions for resetting the counter differ from printer to printer and again, as far as I can tell, are not mentioned in the manual. Population have been able to figure out how to do it, however, and there are instructions online for many printers. Searching for your printer model and either “ink absorber” or “used ink tank” should supply you with a few links to check out. Practically all of them are pretty easy to follow, albeit contrived and not no ifs ands or buts discoverable on your own. Once the counter is reset, you should be able to print again.

Canon Ink Absorber – How To Clean It

If the ink absorber pad in your Canon is no ifs ands or buts full, you might want to replace it. Having it serviced is generally not a good option, since it will likely cost Practically as much as the customary cost of the printer and is not covered under warranty, since it’s determined general wear and tear and not a defect. Canon will, however, sell you a new ink absorber that shouldn’t be too hard to replace. The estimate to call, in the United States, is 732-521-7230, which is their New Jersey parts center. They are open Monday straight through Friday, 9:00am to 8:00pm Est and should be able to sell you a replacement. You can also try to clean the ink absorber on your Canon without exchange using tissue to discharge as much ink from the absorber as you can.

Canon Ink Absorber – How To Clean It



Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

What’s this?

You are currently reading Canon Ink Absorber – How To Clean It at cobyandroidtablets.


%d bloggers like this: